STD (accuracy 1.5% of the load bearing capacity of the vehicle)

  • Cost-effective system for weight assessment
  • Pressure sensor directly in the main line to the lifting frame
  • Quick and simple installation
  • Sensors protected against overload
  • Components are vibration and shock resistant
  • Available as standard display and with numeric keypad
  • Incl. replaceable protective cover
  • 12-24 Volt without converter
  • Delivered without T-piece

Weighing process:

The weight is lifted to a pre-defined height and the determination of the weight starts automatically. After a short waiting period, the weight is determined and displayed.


STD-PRO (accuracy 0.3% - 0.5% of the load bearing capacity of the vehicle)

  • High accuracy through regulated flow with return line to tank
  • Weighing process independent of operator
  • Only one cable required for the display
  • Sensor block insulated and protected against overload
  • Components are vibration and shock resistant
  • Available as standard display and with numeric keypad
  • Incl. replaceable protective cover
  • 12-24 Volt without converter
  • Delivered without T-pieces and hose lines

Weighing process:

The weight is lifted to a stipulated height, a solenoid valve on the measurement block is activated at the push of a button and the fork carriage lowers automatically by ca. 150 mm. The weight is determined and displayed.


STC-3000 (accuracy 0.1% of the load bearing capacity of the vehicle)

  • Very precise weight in less than 10 seconds
  • The most precise hydraulic system in the work, with flow quantity sensor in the hydraulic line
  • Components are vibration and shock resistant
  • Sensors protected against overload
  • Load offset dimension and load bearing capacity remain unchanged
  • Weighing possible in all mast positions due to incline compensation system
  • Attachments (telescopic forks, etc.) do not influence the accuracy though movement of the CoG.
  • Electrical supply 10-100 Volt
  • We recommend mounting, training and adjustments to be carried out by our Griptech service team!

Weighing process:

Instructions at the push of a button and then the weight is lifted at a stipulated speed and then lowered again. The weight is determined and displayed.


Variants and prices

Display steps in kg with nominal forklift load bearing capacity

Series

Forklift load bearing capacity

System accuracy*

Up to 2,500 kg

Up to 5,000 kg

Up to 7,500 kg

Up to 10,000 kg

Up to 20,000 kg

Price €

STD

Up to 20,000 kg

1.50%

every 10 kg

every 20 kg

every 50 kg

every 100 kg

every 200 kg

 

STD-PRO

Up to 10,000 kg

0.3%-0.5%

every 5 kg

every 10 kg

every 20 kg

every 50 kg

-

 

STD-PRO

Up to 20,000 kg

0.3%-0.5%

-

-

-

-

100 kg

 

STC-3000

Up to 3,000 kg

0.10%

2kg

5 kg

10

-

-

 

STC-3000

Up to 20,000 kg

0.10%

-

-

-

10 kg

20 kg

 

165 x 77 (WxH in mm)

Display for STD and STD Pro system, standard display N320, LCD display with 20 mm high digits, robust IP-65 plastic housing incl. protective hood. Functions: Automatic and manual zeroing, tare function with gross/net display and adding function. Background lighting, auto-off switching and date and time information. Standard RS 232 interface

Display for STC-3000, 99 memory slots available for addition or subtraction, incline angle display and lifting height display as standard. Weight, adding memory, gross/net permanently shown in the display. Standard RS232 interface.