Weighing fork tines Weighing accuracy 0.1% of the weight lifted

Weighing fork tines can be attached to any forklift with an FEM fork carriage. The weighing accuracy is very high and the system is designed such that the weighing equipment cannot be damaged by the relatively rough stacker operations. Signal transfer is implemented via radio or spiral cable in standard form. With the legally calibrated version, it is only permitted via cable connection. Also available in conjunction with a fork positioner.

Features / advantages

  • Signal transfer is implemented via radio as standard - alternatively via spiral cable or mast cable connection.
  • With radio transfer - quick and cost-effective installation (battery in transmitter switches to power-saving standby mode if the vehicle is not moving).
  • Weighing at any lifting height.
  • 2 load cells in each fork tine ensure high precision.
  • Sturdy base fork represents a triple safety feature.
  • Legally calibrated versions incl. class III legal calibration certificate and incline sensor

Also available legally calibrated for trade

 

Version with radio transfer, transmitter and battery installed, protected


WG 25

2500

IIA

1150

120 x 62

every 1 kg **

20

410

150

WG 25

980

120 x 62

every 1 kg **

370

140

WG 35

3500

IIIA

1150

120 x 65

every 2 kg **

20

420

160

WG 35

980

120 x 65

every 2 kg **

280

150

Legally calibrated for trade per class III, spiral cable connection

WG-E 15

1500

IIA

1150

120 x 65

every 1 kg **

20

421

158

WG-E 20

2000

1150

120 x 65

every 2 kg **

WG-E 20

2000

1150

120 x 65

every 1 kg **

WG-E 25

2500

1150

120 x 65

every 2 kg **

WG-E 30

3000

IIIA

1150

120 x 65

every 5 kg **

20

421

158

WG-E 30

3000

1150

120 x 65

every 2 kg **

Options

Additional cost €

** Dual range WG 25 (0.5 kg up to 1000kg, 1kg up to 2500kg) for non-legally calibrated version.

 

Dual range WG 35 (1 kg up to 1500kg, 2kg up to 3500kg) for non-legally calibrated version.

 

– Additional cost fork length 1400 mm (thickness + 2mm)

 

– Additional cost fork length 1500 mm (thickness + 2mm)

 

– Additional cost fork length 1600 mm (3 load cells per tine, thickness + 2mm)

 

– Strip printer with date and time function

 

– Voltage converter for 48, 72 or 80 Volt

 

– Display with numeric keypad and special functions (N/R420)

 

– RS 232 interface incl. connection cable and standard plug

 

– Extra replacement battery for radio link (ca. 50 operating hours of active weighing)

 

– Mast cable routing instead of spiral cable on request

– W-LAN data transfer or data logger available on request


165 x 77 (WxH in mm)

Standard display N320 (R320 if legally calibrated for trade), LCD display with 20 mm high digits, robust IP-54 plastic housing incl. protective hood. IP 69 display, see additional cost. Functions: Automatic and manual zeroing, tare function with gross/net display and adding function (optional unit counting function or dosing aid). Background lighting, auto-off switching and date and time information. Standard with RS 232 interface. Communication with terminals on request.

246 x 212 (WxH in mm)

Display N420 with numeric keypad (R420 if legally calibrated for trade) double display and alpha-numeric keyboard. Robust IP-54 plastic housing. Additional 3 function keys for adding, unit counting, dosing aid and printer operation, for example. 100 free memory slots for tare and code entry (Alibi memory optional). Standard with RS 232 interface. Date and time information. Customer-specific programming and communication with terminals on request.